The LSD Ladder Staging System is designed to prove a safe, secure high level work platform (up to 7.5 metres high) and will fit onto any BS EN131 trade quality ladder
The LSD Ladder Staging System is designed to provide a safe, secure high level work platform (up to 7.5 metres high). It complies with BS13374-A (Temporary Edge Protection) and will fit onto (and should only be used with) any BS EN131 trade quality ladder.
The equipment consists of a handed pair of support brackets that mount onto your ladder and are attached two rungs apart. Each support bracket has a telescopic strut, which enables the support arm to be made horizontal very quickly and locked into position.
There are four corner posts that are rapidly locked into place on the staging brackets using captive thumbscrews. The corner posts are fitted with U bolts and L bolts to accept the handrails and toe boards. Finally the Staging Board is mounted across the support brackets and locked into place using the captive L bolts.
The 4 metre and 5 metre boards need a Mid Board Post to support the hand rails.
LSD Staging Boards have a Safe Working Load of 270Kg in accordance with the requirements of BS2037, evenly distributed over their length and are of welded alunimium construction. They are finished with "Rhino-board" boards with non slip work surfaces and are produced in lengths of 2, 3, 4, and 5 metres. The 4 and 5 metre boards have sockets on each side two metres from one end to accept our Mid Board Post, which supports the handrails.
The Mid Board Post has U bolts and an L bolt to retain handrails and toe boards on Staging Boards of 4 and 5 metres in length. These support the handrails, which are of 2 or 3 metres in length. End rails are 750mm
Staging boards over 3 metre in length from other manufacturers will need a Mid Board Post Holder which fits onto the board and has a socket at each end which accepts a mid board post for the handrails.
To comply with the requirements of the HSE and BSI you must use two handrails and two end rails and toe boards.
Our Staging Boards require the following handrails and end rails.
ANKALAD LADDER STABILISER
Now in its fourteenth year, the Ankalad Ladder Stabiliser will not only provide the level of stability required by the HSE (OC200/30) but will virtually eliminate ladder "bounce" and thus improves the stability of the Staging System.
It is easily fitted and easy to put into operation staying permanently on the ladder, folding flat for storage and transport. The adjustable legs cope with uneven ground.
The combined use of Staging System with Ankalad Ladder Stabilisers will satisfy the requirements of the Health and Safety Executive.
IT IS RECOMMENDED THAT THE ANKALAD LADDER STABILISER IS USED WITH ALL STAGING SYSTEMS AND THEY ARE AVAILABLE AT AN ADDITIONAL COST AND CAN BE FOUND IN THE ACCESSORIES SECTION OF OUR WEBSITE.
To make life easier for our customers, these kits include brackets, posts, handrails, staging boards and toeboards for the leading edge.
Select the size of Staging Board you require via the Code Number using the drop down box above and this will automatically re-calculate the price for you.
|CODE NO:||LENGTH OF STAGING|
By continuing to use the site you agree to our privacy & cookies policy